Offshore assets deteriorate through mechanisms that reinforce one another: corrosion causes section loss and raises the local stress, the elevated stress accelerates fatigue, and fatigue damage exposes fresh metal to the marine environment. Deterministic integrity assessment cannot represent that feedback or the environmental variability that drives it. This paper presents a physics-informed probabilistic digital twin for offshore infrastructure in which coupled corrosion–fatigue degradation modelling, Monte Carlo uncertainty propagation, sequential Bayesian data assimilation and a physics-constrained neural surrogate are combined within a single lifecycle assessment loop. The degradation state is a bounded composite index of corrosion penetration, Miner fatigue damage, cumulative environmental exposure and an interaction component, with the stress-amplification coupling regularised so that no governing relation becomes singular as failure is approached. Structural performance is tracked through the second-moment reliability index, and the Infrastructure Degradation Instability Index (IDII) is defined as a bounded, dimensionless ratio between an instability driver, the product of normalised degradation rate and dispersion, and the normalised reliability margin. For a 32 mm-wall tubular reference component configured deliberately as an aggressive 30-year demonstration case, the reliability index falls from 3.48 to 0.70 and the target of 1.5 is reached at 17.8 years; the empirical failure probability counted from the 30,000 Monte Carlo limit-state samples differs from Φ(−β) by at most 2.2 × 10−4, so the two-moment approximation is verified rather than assumed. Global variance decomposition attributes 87 % of the variance in end-of-life degradation to environmental severity. Raising the environment-driven variability multiplier from 0.5 to 2.0 at constant mean severity advances the reliability-target year from 21.5 to 10.8 even though the mean degradation trajectory falls, so variability acts through dispersion rather than through the mean. Sequential importance resampling of annual thickness and strain measurements reduces the predictive dispersion of the 30-year degradation state by 81.5%. IDII thresholds of 0.15, 0.35, 0.50 and 0.65 are mapped to reliability-index levels of 3.06, 2.26, 1.71 and 1.05, and a 21-case sensitivity study shows that the composite-index weights move the reliability-target year between 15.9 and 19.3 years while leaving the regime ordering and the warning lead time (6.6–8.1 years) essentially unchanged. The surrogate reproduces held-out trajectories with RMSE 0.0078 and R2 0.999 but is unreliable beyond its training horizon, which is why long-horizon inference is carried by the Bayesian filter. All parameters, distributions and hyperparameters are reported; the framework is presented as probabilistic decision support for a demonstration configuration, with field validation identified as the prerequisite for operational use.
Yang, Y.; Chen, C.; Zhuang, Y.; Suo, Z. Reviewing the progress of corrosion fatigue research on marine structures. Front. Mater. 2024, 11, 1399292. doi: 10.3389/fmats.2024.1399292.
Dale, K.I.; Pope, E.C.D.; Hopkinson, A.R.; McCaie, T.; Lowe, J.A. Environment-aware digital twins: Incorporating weather and climate information to support risk-based decision-making. Artif. Intell. Earth Syst. 2023, 2(4), e230023. doi: 10.1175/AIES-D-23-0023.1.
Riffat, J.; Samaei, S.R.; Pastakkaya, B. Advances, applications, and future directions of structural health monitoring in civil infrastructure: A comprehensive review. Energy Catal. 2025, 1, 127–140. doi: 10.61552/EC.2025.010.
Shittu, A.A.; Mehmanparast, A.; Shafiee, M.; Kolios, A.; Hart, P.; Pilario, K. Structural reliability assessment of offshore wind turbine support structures subjected to pitting corrosion-fatigue: A damage tolerance modelling approach. Wind Energy 2020, 23(11), 2004–2026. doi: 10.1002/we.2542.
Wang, L.; Kolios, A.; Liu, X.; Venetsanos, D.; Cai, R. Reliability of offshore wind turbine support structures: A state-of-the-art review. Renew. Sustain. Energy Rev. 2022, 161, 112250. doi: 10.1016/j.rser.2022.112250.
Adedipe, O.; Brennan, F.; Kolios, A. Review of corrosion fatigue in offshore structures: Present status and challenges in the offshore wind sector. Renew. Sustain. Energy Rev. 2016, 61, 141–154. doi: 10.1016/j.rser.2016.02.017.
Shamir, M.; Braithwaite, J.; Mehmanparast, A. Fatigue life assessment of offshore wind support structures in the presence of corrosion pits. Mar. Struct. 2023, 92, 103505. doi: 10.1016/j.marstruc.2023.103505.
Larrosa, N.O.; Akid, R.; Ainsworth, R.A. Corrosion-fatigue: A review of damage tolerance models. Int. Mater. Rev. 2018, 63(5), 283–308. doi: 10.1080/09506608.2017.1375644.
Grieves, M.; Vickers, J. Digital twin: Mitigating unpredictable, undesirable emergent behavior in complex systems. In Transdisciplinary Perspectives on Complex Systems, Kahlen, F.-J., Flumerfelt, S., Alves, A., Eds.; Springer: Cham, Switzerland, 2017; pp. 85–113. doi: 10.1007/978-3-319-38756-7_4.
Glaessgen, E.H.; Stargel, D.S. The digital twin paradigm for future NASA and U.S. Air Force vehicles. In Proceedings of the 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, USA, 2012; AIAA 2012-1818. doi: 10.2514/6.2012-1818.
Tao, F.; Cheng, J.; Qi, Q.; Zhang, M.; Zhang, H.; Sui, F. Digital twin-driven product design, manufacturing and service with big data. Int. J. Adv. Manuf. Technol. 2018, 94, 3563–3576. doi: 10.1007/s00170-017-0233-1.
Kapteyn, M.G.; Pretorius, J.V.R.; Willcox, K.E. A probabilistic graphical model foundation for enabling predictive digital twins at scale. Nat. Comput. Sci. 2021, 1(5), 337–347. doi: 10.1038/s43588-021-00069-0.
Mousavi, Z.; Varahram, S.; Ettefagh, M.M.; Sadeghi, M.H.; Feng, W.-Q.; Bayat, M. A digital twin-based framework for damage detection of a floating wind turbine structure under various loading conditions based on deep learning approach. Ocean Eng. 2024, 292, 116563. doi: 10.1016/j.oceaneng.2023.116563.
Pastor-Sanchez, A.; Garcia-Espinosa, J.; Di Capua, D.; Servan-Camas, B.; Berdugo-Parada, I. Real-time digital twin for structural health monitoring of floating offshore wind turbines. J. Mar. Sci. Eng. 2025, 13(10), 1953. doi: 10.3390/jmse13101953.
Rølvåg, T.; Stranden, Ø. Digital twin based structural health monitoring of offshore crane. In Proceedings of the ASME 2022 41st International Conference on Ocean, Offshore and Arctic Engineering, Hamburg, Germany, 5–10 June 2022. doi: 10.1115/OMAE2022-85896.
Mauro, F.; Kana, A.A. Digital twin for ship life-cycle: A critical systematic review. Ocean Eng. 2023, 269, 113479. doi: 10.1016/j.oceaneng.2022.113479.
Jorgensen, J.; Hodkiewicz, M.; Cripps, E.; Hassan, G.M. Requirements for the application of the digital twin paradigm to offshore wind turbine structures for uncertain fatigue analysis. Comput. Ind. 2023, 145, 103806. doi: 10.1016/j.compind.2022.103806.
Ramezani, M.; Choe, D.E.; Heydarpour, K.; Koo, B. Uncertainty models for the structural design of floating offshore wind turbines: A review. Renew. Sustain. Energy Rev. 2023, 185, 113610. doi: 10.1016/j.rser.2023.113610.
Karniadakis, G.E.; Kevrekidis, I.G.; Lu, L.; Perdikaris, P.; Wang, S.; Yang, L. Physics-informed machine learning. Nat. Rev. Phys. 2021, 3(6), 422–440. doi: 10.1038/s42254-021-00314-5.
Tao, F.; Sui, F.; Liu, A.; Qi, Q.; Zhang, M.; Song, B.; et al. Digital twin-driven product design framework. Int. J. Prod. Res. 2019, 57(12), 3935–3953. doi: 10.1080/00207543.2018.1443229.
Li, S.; Brennan, F. Digital twin enabled structural integrity management: Critical review and framework development. Proc. Inst. Mech. Eng. Part M J. Eng. Marit. Environ. 2024, 238(4), 707–727. doi: 10.1177/14750902241227254.
Li, S.; Brennan, F. Implementation of digital twin-enabled virtually monitored data in inspection planning. Appl. Ocean Res. 2024, 144, 103903. doi: 10.1016/j.apor.2024.103903.
Sakr, M.; Sadhu, A. Recent progress and future outlook of digital twins in structural health monitoring of civil infrastructure. Smart Mater. Struct. 2024, 33(3), 033001. doi: 10.1088/1361-665X/ad2bd7.
Lai, X.; Yang, L.; He, X.; Pang, Y.; Song, X.; Sun, W. Digital twin-based structural health monitoring by combining measurement and computational data: An aircraft wing example. J. Manuf. Syst. 2023, 69, 76–90. doi: 10.1016/j.jmsy.2023.06.006.
Chen, C.; Fu, H.; Zheng, Y.; Tao, F.; Liu, Y. The advance of digital twin for predictive maintenance: The role and function of machine learning. J. Manuf. Syst. 2023, 71, 581–594. doi: 10.1016/j.jmsy.2023.10.010.
Samaei, S.R.; Riffat, J. Intelligent structural health monitoring of jack-up platform legs using high-density sensor networks, real-time digital twins, and machine learning-based damage detection. Future Cities Environ. 2025, 11, 31. doi: 10.70917/fce-2025-031.
Samaei, S.R.; Riffat, J. Field-validated digital twin–enabled structural health monitoring for offshore high-pile wharves. Future Cities Environ. 2026, 12, 22. doi: 10.70917/fce-2026-010.
Riffat, J.; Ahadpour Doudran, H.; Samaei, S.R. AI-driven digital twin for uncertainty-aware structural health monitoring of offshore wind turbines considering biofouling effects and reliability prediction. Green Technol. Innov. 2025, 1(2), 025330013. doi: 10.36922/GTI025330013.
Riffat, J.; Ahadpour Doudran, H.; Samaei, S.R. AI-enhanced damage detection in jack-up rig legs using an improved modal strain energy index: A numerical, experimental, and digital twin-based approach. Green Technol. Innov. 2025, 1(2), 025340014. doi: 10.36922/GTI025340014.
Riffat, J.; Nazari, K.; Samaei, S.R. AI-driven digital twin framework for adaptive and real-time structural health monitoring of offshore marine structures. Artif. Intell. Sustain. Cities 2026, 1(1), 105–122. doi: 10.65582/aifsc.2026.006.
Melchers, R.E. Modeling of marine immersion corrosion for mild and low-alloy steels—Part 1: Phenomenological model. Corrosion 2003, 59(4), 319–334. doi: 10.5006/1.3277564.
Melchers, R.E. Modeling of marine immersion corrosion for mild and low-alloy steels—Part 2: Uncertainty estimation. Corrosion 2003, 59(4), 335–344. doi: 10.5006/1.3277565.
Miner, M.A. Cumulative damage in fatigue. J. Appl. Mech. 1945, 12(3), A159–A164. doi: 10.1115/1.4009458.
Paris, P.; Erdogan, F. A critical analysis of crack propagation laws. J. Basic Eng. 1963, 85(4), 528–533. doi: 10.1115/1.3656900.
Shittu, A.A.; Mehmanparast, A.; Hart, P.; Kolios, A. Comparative study between S-N and fracture mechanics approach on reliability assessment of offshore wind turbine jacket foundations. Reliab. Eng. Syst. Saf. 2021, 215, 107838. doi: 10.1016/j.ress.2021.107838.
Tafazzoli Moghaddam, B.; Hamedany, A.M.; Taylor, J.; Mehmanparast, A.; Brennan, F.; Davies, C.M.; et al. Structural integrity assessment of floating offshore wind turbine support structures. Ocean Eng. 2020, 208, 107487. doi: 10.1016/j.oceaneng.2020.107487.
Zhu, F.; Yeter, B.; Brennan, F.; Collu, M. Time-domain fatigue reliability analysis for floating offshore wind turbine substructures using coupled nonlinear aero-hydro-servo-elastic simulations. Eng. Struct. 2024, 318, 118759. doi: 10.1016/j.engstruct.2024.118759.
Yeter, B.; Brennan, F. Probabilistic structural integrity assessment of a floating offshore wind turbine under variable amplitude loading. Procedia Struct. Integr. 2024, 57, 133–143. doi: 10.1016/j.prostr.2024.03.016.
Partovi-Mehr, N.; DeFrancisci, J.; Minaeijavid, M.; Moaveni, B.; Kuchma, D.; Baxter, C.D.P.; et al. Fatigue analysis of a jacket-supported offshore wind turbine at Block Island Wind Farm. Sensors 2024, 24(10), 3009. doi: 10.3390/s24103009.
Beck, J.L.; Katafygiotis, L.S. Updating models and their uncertainties. I: Bayesian statistical framework. J. Eng. Mech. 1998, 124(4), 455–461. doi: 10.1061/(ASCE)0733-9399(1998)124:4(455).
Katafygiotis, L.S.; Beck, J.L. Updating models and their uncertainties. II: model identifiability. J. Eng. Mech. 1998, 124(4), 463–467. doi: 10.1061/(ASCE)0733-9399(1998)124:4(463).
Vanik, M.W.; Beck, J.L.; Au, S.-K. Bayesian probabilistic approach to structural health monitoring. J. Eng. Mech. 2000, 126(7), 738–745. doi: 10.1061/(ASCE)0733-9399(2000)126:7(738).
Arulampalam, M.S.; Maskell, S.; Gordon, N.; Clapp, T. A tutorial on particle filters for online nonlinear/non-Gaussian Bayesian tracking. IEEE Trans. Signal Process. 2002, 50(2), 174–188. doi: 10.1109/78.978374.
Rocchetta, R.; Broggi, M.; Huchet, Q.; Patelli, E. On-line Bayesian model updating for structural health monitoring. Mech. Syst. Signal Process. 2018, 103, 174–195. doi: 10.1016/j.ymssp.2017.10.015.
Torzoni, M.; Manzoni, A.; Mariani, S. Enhancing Bayesian model updating in structural health monitoring via learnable mappings. Eng. Comput. 2025, 41, 4953–4975. doi: 10.1007/s00366-025-02224-x.
Wang, M.; Wang, C.; Hnydiuk-Stefan, A.; Feng, S.; Atilla, I.; Li, Z. Recent progress on reliability analysis of offshore wind turbine support structures considering digital twin solutions. Ocean Eng. 2021, 232, 109168. doi: 10.1016/j.oceaneng.2021.109168.
Raissi, M.; Perdikaris, P.; Karniadakis, G.E. Physics-informed neural networks: A deep learning framework for solving forward and inverse problems involving nonlinear partial differential equations. J. Comput. Phys. 2019, 378, 686–707. doi: 10.1016/j.jcp.2018.10.045.
Viana, F.A.C.; Subramaniyan, A.K. A survey of Bayesian calibration and physics-informed neural networks in scientific modeling. Arch. Comput. Methods Eng. 2021, 28, 3801–3830. doi: 10.1007/s11831-021-09539-0.
Dourado, A.; Viana, F.A.C. Physics-informed neural networks for missing physics estimation in cumulative damage models: A case study in corrosion fatigue. J. Comput. Inf. Sci. Eng. 2020, 20(6), 061007. doi: 10.1115/1.4047173.
Zhang, X.; Wang, Q.; Ye, S.; Luo, K.; Fan, J. Efficient layout optimization of offshore wind farm based on load surrogate model and genetic algorithm. Energy 2024, 309, 133106. doi: 10.1016/j.energy.2024.133106.
Riaz, K.; McAfee, M.; Gharbia, S.S. Management of climate resilience: Exploring the potential of digital twin technology, 3D city modelling, and early warning systems for climate-resilient cities. Sensors 2023, 23(5), 2659. doi: 10.3390/s23052659.
Ayadi, R.; Forouheshfar, Y.; Moghadas, O. Enhancing system resilience to climate change through artificial intelligence: A systematic literature review. Front. Clim. 2025, 7, 1585331. doi: 10.3389/fclim.2025.1585331.
Samaei, S.R.; Riffat, J. Health-aware digital twins for building control under climate extremes: An exposure-state control framework. Res. Rev. Sustain. 2026, 2(1), 179–203. doi: 10.65582/rrs.2026.011.